Continuous filament multifilament
The base yarn. Uniform filament structure, run flat with no added twist — for weaving, tape reinforcement and downstream twisting.
Request a quote
Request a quote
A brand of Bin Qasim Packages (Pvt) Ltd · Port Qasim, Karachi
Polypropylene multifilament yarn built to hold a seam — 700 to 4000 denier, 6–7 g/den, drawn on European extrusion lines and checked batch to batch.
Strength in every thread.
About Filamentex
Filamentex is the polypropylene multifilament yarn brand of Bin Qasim Packages (Pvt) Ltd. We already run PP through our own plant every day as woven fabric and FIBC — so we came to yarn knowing exactly how it fails on a stitching line, and what a buyer actually notices when a batch drifts.
That plant-floor knowledge sits behind every spindle. European extrusion equipment holds denier, tenacity and twist inside a tight window; our own quality checks confirm it before the yarn leaves Port Qasim.
Reliable, repeatable, high-performance yarn — order after order.
Our vision
To become a globally trusted supplier of high-performance polypropylene yarn by delivering consistent quality, reliable supply, and long-term value to our partners.
The material
At a specific gravity of 0.91, PP is the lightest commercial synthetic fibre in common use. You get more running length per kilogram than nylon or polyester, and the fibre shrugs off water and most plant chemicals.
Lighter than water, and the lightest of the common synthetics — higher yield and more coverage per kilogram.
Effectively hydrophobic. Dimensions and strength hold through humid storage and monsoon shipping.
Stable against acids, alkalis and most industrial chemicals encountered in fertiliser, cement and chemical packing.
Strong yet light — load-bearing seams without adding mass to the bag or the freight bill.
Survives needle heat and guide friction, so fewer thread breaks and fewer machine stops.
Does not support bacterial growth and stays neutral against the goods it packs.
Product range
The base yarn. Uniform filament structure, run flat with no added twist — for weaving, tape reinforcement and downstream twisting.
Twist inserted to your TPM. Rounder, firmer package that feeds cleanly through needle eyes and tensioners at speed.
Drawn hard for 6–7 g/den with controlled elongation. Built for load-bearing seams on FIBC and heavy woven sacks.
Denier, twist, strength profile and colour set against your machine and end use. Send a sample and a target; we match it.
Colour on request
Pigment goes in at the extruder, so the colour runs through the filament and will not rub off on the fabric. Standard shades below; matched shades to your reference on request.
Key features
Which adds up to fewer thread breaks during stitching, cleaner seam holding, and stable output on high-speed lines.
Manufacturing & process control
Prime PP resin checked on arrival for melt flow and contamination before it reaches the hopper.
European extrusion technology with metered dosing. Melt temperature and throughput held steady so denier does not wander.
Godet ratios set the strength–elongation balance. This is where 6–7 g/den is made or lost.
Twist inserted to the specified TPM and wound to a stable package that unwinds without snarling.
Denier, tenacity and elongation verified against the order sheet. Batch records kept so a repeat order can be matched.
Technical specifications
Standard production window. Values can be set to your application — tell us the machine and the seam and we will work back from there.
| Parameter | Specification |
|---|---|
| Denier | 700 D – 4000 D (Denier below 700 coming soon) |
| Ply | Single ply (2 ply and 3 ply coming soon) |
| Tenacity | 6 – 7 g/den |
| Elongation | 20 – 25 % |
| Twist | As per requirement (TPM) |
| Shrinkage | Low |
| Specific gravity | 0.91 |
| Moisture absorption | Very low |
| Colour | Natural, or matched to reference |
Applications
Also supplied for industrial sewing threads and general packaging. If your end use is not listed, send the spec — the yarn is built to order.
Common questions
Standard production runs from 700 to 4000 denier. Deniers below 700 are coming soon.
6 to 7 grams per denier, with elongation held between 20 and 25 percent. Tell us which side of that window your seam needs and we set the draw ratio accordingly.
Yes. Colour is added as masterbatch at the extruder, so pigment runs through the filament rather than sitting on the surface and will not rub off onto the fabric. Shades can be matched to a reference sample.
Single ply is in production now. Two-ply and three-ply constructions are coming soon.
Yes. Samples can be arranged for evaluation on your own stitching or twisting line. Send the denier, twist and end use and we will match the specification.
At the Bin Qasim Packages plant at Plot E-39 and E-40, North Western Industrial Zone, Port Qasim, Karachi, Pakistan, on European extrusion equipment.
The company behind the brand
A vertically integrated polypropylene manufacturer at Port Qasim, Karachi, with eighteen years in PP-based industrial packaging. Three lines run under one roof: PP woven bags, FIBC bulk bags, and Filamentex multifilament yarn.
Integration is the point. We consume our own yarn in our own bags, so a quality problem shows up on our stitching floor before it ever reaches yours.
Get in touch
Send your specification and we will come back with availability, lead time and a price. Samples can be arranged for evaluation on your own line.